Esta mañana, cuando he ido hablar con la gente, encendí mi ACER ASPIRE ONE, donde tengo anotado todos los avisos que suelo comunicar, además de apuntes contables y demás cosas de donde trabajo. Y cual es mi sorpresa.... DIOS MIO EL CACHARRO NO ARRANCA. Se encendía el piloto de encendido pero nada mas, pantalla en negro. No responde nada. Vamos que mi pequeño cacharro de 3 meses de uso se me habia convertido en un ladrillo, y eso que la noche anterior estube trabajando hasta la 1:40 de la madrugada sin ningun problema. En fin que, maldita sea, me habia quedado sin aparato.
Ya concienciado que me tocaba meterlo al taller se me ha ocurrido consultar en internet y por lo visto este fallo en los ASPIRE ONE ha sido frecuente por problemas de la actualizacion de la bios. La solución la explicaban en la dirección que ahora os pongo, por si alguno tiene un aparato de estos, y la verdad sea dicha: FUNCIONA, ¡¡¡¡ VIIIIVEEEEE!!!.
Bueno, lo dicho que al menos he recuperado la maquina. Os pongo el enlace:
http://macles.blogspot.com/2008/08/acer-aspire-one-bios-recovery.htmlEsta en ingles, pero es muy sencillo de entender.
Abajo pongo tambien el enlace a las ultimas versiones de la BIOS.
http://sites.google.com/site/maclesblogspotcom/*******************************************************************************
The AA1 has a built-in BIOS recovery routine, making it possible to flash the BIOS even if the system doesn't boot anymore. It's only meant for emergencies and may void your warranty, so use at your own risk.
Follow every step carefully!
First format an USB stick with FAT.
Download the
latest BIOS, and put both FLASHIT.EXE and the BIOS file in the root directory of the stick. Rename the BIOS file to
ZG5IA32.FD, that's important. Do not remove the USB stick.
Turn the AA1 off, make sure both battery and AC adapter are connected. Press Fn+Esc, keep it pressed and press the power button to turn the AA1 on. Release Fn+Esc after a few seconds, the power button will be blinking. Press the power button once. The AA1 will now initiate the BIOS flash, do not interrupt it under any circumstances. After a while the power button will stop blinking, and the AA1 will reboot shortly after. Wait patiently.
The BIOS has been flashed and all settings reset to default.
If for some reason you made a mistake during the procedure and it doesn't reboot by itself wait 5 minutes before turning it off, just to be safe that it isn't still flashing the BIOS. ***********************************************************************************
6 comentarios:
Wolflars dijo...
perdona el borrón de arriba tio :(
tengo un acer aspire 5610, no es igual pero me apunto la página xk q bueno saber q algunos remedios están en la red y podemos resucitar el ladrillete, 3 meses sólo? wooow! tiene q volar ese ordenata
Gracias Wolflars :D
;) Si tiene 3 meses, pero a parte de este problema por lo demás sigue funcionando bien.
Ahora bien, hoy he comprobado un ACER ASPIRE ONE de los que vienen con Windows por defecto, el mio tenia Limpux de linus, y he de decir que con el windows viene muy bien amueblado el equipo. Mucho software añadido, disco duro de 160 gb, 1 gb de ram, camara de 1.3 creo, vamos que por 50 euros mas merece la pena este mas que el que tengo yo. No descarto, si puedo vender el mio, comprar el nuevo modelo. Sino, me aguanto y sigo con el que tengo, jeje, que el bolsillo no da para todo. :)
sólo he usado Windows, todos hablan de linux maravillas pero no sé... buff un disco de 160Gb y 1 Gb de ram eso rompe el sonido wooow!:D
Por el amor de Dios... vete a ver la última del 007 y pon un comentario...